WANTED LEAK DETECTIVES FOR FIX A LEAK WEEK MARCH 14 – 20, 2016
WHAT IS FIX A LEAK WEEK?
Because minor water leaks account for more than 1 trillion gallons of water wasted each year in U.S. homes, the U.S. Environmental Protection Agency’s WaterSense program promotes Fix a Leak Week the third week of March each year. Fix a Leak Week is an annual reminder to Americans to check household plumbing fixtures and irrigation systems for leaks.
THE FACTS ON LEAKS:
The average household’s leaks can account for more than 10,000 gallons of water wasted every year, or the amount of water needed to wash 270 loads of laundry.
Households leaks can waste more than 1 trillion gallons annually nationwide. That’s equal to the annual household water use of more than 11 million homes.
Ten percent of homes have leaks that waste 90 gallons or more per day.
Common types of leaks found in the home include worn toilet flappers, dripping faucets, and leaking shower heads. All are easily correctable.
Fixing easily corrected household water leaks can save homeowners about 10 percent on their water bills.
Keep you home leak-free by repairing dripping faucets, toilet flappers, and shower heads. In most cases, fixture replacement parts don’t require a major investment.
You can eliminate most common leaks by retrofitting your home with new WaterSense labeled fixtures and other high-efficiency appliances.
A good method to check for leaks is to examine your winter water use. It’s likely that a family of four has a serious leak problem if its winter water use exceeds 12,000 gallons per month.
Check your water meter before and after a two-hour period when no water is being used. If the meter does not read exactly the same, you probably have a leak.
One way to find out if you have a toilet leak is to place a drop of food coloring in the toilet tank. If the color shows up in the bowl within 10 minutes without flushing, you have a leak. Make sure to flush immediately after this experiment to avoid staining the tank.
FAUCETS AND SHOWER HEADS:
A leaky faucet that drips at the rate of one drip per second can waste more than 3,000 gallons per year. That’s the amount of water needed to take more than 180 showers!
Leaky faucets can be fixed by checking faucet washers and gaskets for wear and replacing them if necessary. If you are replacing a faucet, look for the WaterSense label.
A shower head leaking at 10 drips per minute wastes more than 500 gallons per year. That’s the amount of water it takes to wash 60 loads of dishes in your dishwasher.
You can fix most leaky shower heads by ensuring a tight connection using pipe tape and a wrench. If you are replacing a shower head, look for one that has earned the WaterSense label.
If your toilet is leaking, the cause is often an old or faulty toilet flapper. Over time, this inexpensive rubber part decays, or minerals build up on it. It’s usually best to replace the whole rubber flapper – a relatively easy, inexpensive do-it-yourself project that pays for itself in no time.
If you do need to replace the entire toilet, look for the WaterSense label. If the average family replaces its older, inefficient toilets with new WaterSense labeled ones, it could save 13,000 gallons of water per year. Retrofitting the house could save the family nearly $2,400 in water and wastewater bills over the lifetime of the toilets.
FOR THE KIDS:
Kids aren’t just the leaders of tomorrow, they’re the dreamers and do-er’s of today. “Test Your Water Sense” and try other fun activities at Flo’s Kids Zone at: http://1.usa.gov/1lzAJGv.